CHEMMAT 203 : Process Engineering 3: Transfer Processes

Engineering

2024 Semester Two (1245) (15 POINTS)

Course Prescription

Fluid properties and statics (specific gravity, viscosity, surface tension, flow types, manometry). Modelling fluid motion (Bernoulli equation. Dimensional analysis and similitude: Reynolds Number, Friction factor, Prandtl number). Flow measurement (pumps/pumping and valves). Heat transfer including: steady state conduction, convection and radiation; and effects of geometry, force and natural convection. Heat transfer processes (correlation with flow processes, heat transfer coefficients). Applications.

Course Overview

This is a foundation course for the Chemical & Materials Engineering programme.  You will learn the basic static and flow properties of fluids and how they interact with engineering systems.  You will also learn how energy is transferred as heat in engineering systems.  One key component in the delivery of this course is in the incorporation of numerical tools for the analysis of more complex fluid and energy transport problems.  Some of the key applications covered in this course are pump selection and basic heat exchanger design.

Course Requirements

Restriction: CHEMMAT 213

Capabilities Developed in this Course

Capability 3: Knowledge and Practice
Capability 4: Critical Thinking
Capability 5: Solution Seeking

Learning Outcomes

By the end of this course, students will be able to:
  1. Apply the principles of fluid statics in Chemical Engineering systems involving the holding of fluids and its subsequent effect on submerged objects. (Capability 3.1 and 3.2)
  2. Apply the principles of fluid dynamics in Chemical Engineering systems involving the transfer of liquid and gases. (Capability 3.1 and 3.2)
  3. Employ the principles of heat transfer conduction (steady-state and transient) to solve real-world problems. (Capability 3.1 and 3.2)
  4. Apply the principles of heat transfer convection to evaluate heat transfer coefficients for natural and forced convection. (Capability 3.1 and 3.2)
  5. Analyse heat exchanger performance using the log mean temperature difference and heat exchanger effectiveness methods by understanding the concepts behind the heat exchangers. (Capability 3.1 and 3.2)
  6. Demonstrate practical proficiency in heat transfer and fluid mechanic processes. (Capability 4.1)
  7. Utilize numerical techniques to solve complex problems related to fluid mechanics and heat transfer. (Capability 5.1)

Assessments

Assessment Type Percentage Classification
Final Exam 40% Individual Examination
Tests 20% Individual Test
Assignment and labs 40% Group & Individual Coursework
Assessment Type Learning Outcome Addressed
1 2 3 4 5 6 7
Final Exam
Tests
Assignment and labs

Students must sit the exam to pass the course. Otherwise, a DNS (did not sit) result will be returned.

Workload Expectations

This course is a standard 15 point course and students are expected to spend 10 hours per week involved in each 15 point course that they are enrolled in.

For this course, you can expect 48 hours of lectures, 46 hours of reading and thinking about the content and 56 hours of work on assignments and/or test preparation.

Delivery Mode

Campus Experience

Attendance is required at scheduled labs to complete components of the course.
Lectures will be available as recordings. 
Attendance on campus is required for the test(s).
The activities for the course are scheduled as a standard weekly timetable.

Learning Resources

Course materials are made available in a learning and collaboration tool called Canvas which also includes reading lists and lecture recordings (where available).

Please remember that the recording of any class on a personal device requires the permission of the instructor.

Health & Safety

This course will involve laboratory components undertaken in the MDLS space.  Safety induction to the MDLS space will be embedded in the Canvas site of the course.  Students are expected to adhere to the guidelines outlined in the Health and Safety section of the Engineering Undergraduate Handbook.

Student Feedback

At the end of every semester students will be invited to give feedback on the course and teaching through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions.

Your feedback helps teachers to improve the course and its delivery for future students.

Class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

For the coming semester, we will improve on the following:

1. Logistics surrounding the fluid mechanics lab.
2. Weightage of the MATLAB component.
3. Notes for the conduction section.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed for potential plagiarism or other forms of academic misconduct, using computerised detection mechanisms.

Class Representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor.

Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website http://disability.auckland.ac.nz

Special Circumstances

If your ability to complete assessed coursework is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due.

If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page https://www.auckland.ac.nz/en/students/academic-information/exams-and-final-results/during-exams/aegrotat-and-compassionate-consideration.html.

This should be done as soon as possible and no later than seven days after the affected test or exam date.

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter https://www.auckland.ac.nz/en/students/forms-policies-and-guidelines/student-policies-and-guidelines/student-charter.html.

Disclaimer

Elements of this outline may be subject to change. The latest information about the course will be available for enrolled students in Canvas.

In this course students may be asked to submit coursework assessments digitally. The University reserves the right to conduct scheduled tests and examinations for this course online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.