CIVIL 312 : Structures and Design 2

Engineering

2023 Summer School (1230) (15 POINTS)

Course Prescription

Structural analysis of indeterminate structures. Moment-area method for deformations. Loading actions as per NZS 1170 and load collation. Design of structural members in timber portal frames.

Course Overview

The objectives of the course are to:

  •  Introduce structural design and loading in particular relation to timber design
  •  Review and extend structural analysis for determinate and indeterminate structures
  •  Show how loads are collated and tracked through a structure to the foundation
  •  Provide an overview of timber structural forms
  •  Introduce structural design standards (Design Actions & Timber).
  •  Understand and apply design concepts involved in structural timber design
  •  Introduce LVL, plywood and nailed moment connections in portal frames

Course Requirements

Prerequisite: CIVIL 211

Capabilities Developed in this Course

Capability 1: Disciplinary Knowledge and Practice
Capability 2: Critical Thinking
Capability 3: Solution Seeking
Capability 4: Communication and Engagement
Capability 5: Independence and Integrity
Capability 6: Social and Environmental Responsibilities

Learning Outcomes

By the end of this course, students will be able to:
  1. Analyse statically determinate and indeterminate structures (Capability 1.1, 2.1, 3.1, 3.2 and 4.1)
  2. Understand the design relating to structures in terms of load paths and load collation (Capability 1.1, 2.1, 3.1 and 4.1)
  3. Understand the construction concepts relating to timber structures (Capability 1.1, 2.1, 2.2, 3.1, 3.2, 4.1, 4.2 and 6.2)
  4. Apply the design standards with regard to design loadings and structural timber design (Capability 1.1, 2.1, 2.2, 3.1, 4.1, 4.2, 5.1 and 6.2)
  5. Understand and apply design concepts in structural timber design (Capability 1.1, 2.1, 2.2, 3.1, 3.2, 4.2, 4.3, 5.2 and 6.2)

Assessments

Assessment Type Percentage Classification
Test 10% Individual Test
Assignments 30% Group & Individual Coursework
Final Exam 60% Individual Examination
Assessment Type Learning Outcome Addressed
1 2 3 4 5
Test
Assignments
Final Exam

Workload Expectations

This course is a standard 15 point course. The summer semester is shorter than a regular semester, so students are expected to spend 20 hours per week involved in each 15 point course that they are enrolled in.

For this course, you can expect an average weekly workload comprising 6 hours of lectures, 2 hours of tutorials, 4 hours of reading and thinking about the content and 8 hours of work on assignments and/or test preparation.

Delivery Mode

Campus Experience

This course is intended to be a Campus Experience course but allowances have been made for those unable to attend on campus due to the impact of COVID 19.

For those attending on campus:

Attendance is required at scheduled activities including tutorials to complete components of the course.

Lectures will be available as recordings. Other learning activities including tutorials will be available as recordings.

The course will not include live online events.

Attendance on campus is required for the test/exam.

The activities for the course are scheduled as a standard weekly timetable.

For those approved to study remotely due to the impact of COVID 19:

Attendance is expected at scheduled online activities including labs/tutorials to complete components of the course.

The course will not include live online events.

Attendance on campus is not required for the test/exam.

Where possible, study material will be available at course commencement or be released progressively throughout the course.

This course runs to the University semester timetable and all the associated completion dates and deadlines will apply.

Learning Resources

Course materials are made available in a learning and collaboration tool called Canvas which also includes reading lists and lecture recordings (where available).

Please remember that the recording of any class on a personal device requires the permission of the instructor.

Course books for Part A and Part B
Student standard booklets
Worked tutorial solutions
Lecture recordings
Recorded tutorial worked examples

Health & Safety

Students are expected to adhere to the guidelines outlined in the Health and Safety section of the Engineering Undergraduate Handbook.

Student Feedback

At the end of every semester students will be invited to give feedback on the course and teaching through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions.

Your feedback helps teachers to improve the course and its delivery for future students.

Class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

The return to in-class lecturing away from the remote learning environment will facilitate increased interaction with students.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed against online source material using computerised detection mechanisms.

Class Representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor.

Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website http://disability.auckland.ac.nz

Special Circumstances

If your ability to complete assessed coursework is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due.

If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page https://www.auckland.ac.nz/en/students/academic-information/exams-and-final-results/during-exams/aegrotat-and-compassionate-consideration.html.

This should be done as soon as possible and no later than seven days after the affected test or exam date.

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter https://www.auckland.ac.nz/en/students/forms-policies-and-guidelines/student-policies-and-guidelines/student-charter.html.

Disclaimer

Elements of this outline may be subject to change. The latest information about the course will be available for enrolled students in Canvas.

In this course students may be asked to submit coursework assessments digitally. The University reserves the right to conduct scheduled tests and examinations for this course online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.