ARCHGEN 742 : Special Topic: Timber Technology

Creative Arts and Industries

2021 Semester Two (1215) (15 POINTS)

Course Prescription

Students will build a small building (a shelter) in a group, and then design a second shelter, through concept plans, developed design plans and a scale model.

Course Requirements

Restriction: ARCHGEN 740, 741, 743-745

Capabilities Developed in this Course

Capability 1: Disciplinary Knowledge and Practice
Capability 2: Critical Thinking
Capability 3: Solution Seeking
Capability 4: Communication and Engagement
Capability 5: Independence and Integrity
Capability 6: Social and Environmental Responsibilities

Learning Outcomes

By the end of this course, students will be able to:
  1. Be able to demonstrate practical skills of collaboration / process / organizational roles in group environment and work stream coordination of the fabrication of a detail as part of the assembly process of the construction of a timber structure with the use of workshop tools. (Capability 1.1, 1.3, 3.2, 4.1 and 5.3)
  2. Demonstrate an advanced understanding of key theories and design principles of the fabrication techniques of high tech timber components and their assembly into timber buildings (Capability 1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 3.1, 3.2, 4.1, 4.3, 5.2 and 6.2)
  3. Be able to offer an informed description and critique of decisions around advanced timber building design (Capability 1.1, 2.1, 2.2, 2.3, 4.1, 4.2, 4.3, 5.1, 5.2 and 5.3)

Assessments

Assessment Type Percentage Classification
Presentation 1 - Concept Design 30% Individual Coursework
Presentation 2 - Final Design 50% Individual Coursework
Essay 10% Individual Coursework
Practical 10% Group Coursework
Assessment Type Learning Outcome Addressed
1 2 3
Presentation 1 - Concept Design
Presentation 2 - Final Design
Essay
Practical

Teaching & Learning Methods

The seminar consists of a number of lectures, guest lectures and site visits delivered in the first three weeks.
Group workshop sessions start at week 4 through to week 11, where students will be assisting the fabrication of a timber structure in the workshop. 
Students will be presenting their own individual concept design after mid semester break to critics and then presenting their final design  at the end of the semester. 


Workload Expectations

This course is a standard 15 point course and students are expected to spend 10 hours per week involved in each 15 point course that they are enrolled in.

For this course, you can expect 14 hours of workshops, 8 hours of presentations, 6 hours of lectures, 6 hours of site visits, a 3 hour tutorial, 113 hours of self directed study towards presentations and essay preparation. 

Delivery Mode

Campus Experience

Attendance is expected at scheduled activities including lectures/ tutorials/ workshops  and it is required for students presentations to receive credit for components of the course.

Lectures will be not be available as recordings.

Other learning activities including seminars/tutorials will not be available as recordings.

The course will not include live online events. 

The activities for the course are scheduled as a standard weekly timetable.

Learning Resources

See the Talis Reading list for essential and recommended resources. These will be made available two weeks prior to the semester.

Health & Safety

In the workshop to work safely at all times with the appropriate protection for your feet with steel cap boots.
High visibility waist coat and hard hat when working at heights.
Protective eye wear when using drills.
Protective ear muffs when using loud tools.  

Student Feedback

At the end of every semester students will be invited to give feedback on the course and teaching through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions.

Your feedback helps teachers to improve the course and its delivery for future students.

Class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

Other Information

PASS REQUIREMTENTS: Presentation 2 is compulsory. Not doing presentation 3 will lead to a DNC in your academic record and to the automatic failure of this course. 

LATE SUBMISSIONS: Late submissions will be considered on medical and special grounds when supported by a health or other professional's advice, and when the application is made according to the following procedure. Requests for extensions of time must be submitted and approved before the due date, unless there are exceptional circumstances. Students applying for an extension of time must obtain an ‘Extension of Time Form for Coursework Submission’ from the School of Architecture and Planning Office (6th floor of the Architecture Building, Building 421, 26 Symonds Street), complete the required details and attach any relevant document. Late submission forms must be signed by the appropriate School staff (step 1: course coordinator; step 2: programme director). Coursework not received by the due date, and for which no extension of time has been approved, will receive a ‘DNC’ (Did Not Complete) for Presentation 2 and zero grade for Presentation 1 and the Essay.

Digital Resources

Course materials are made available in a learning and collaboration tool called Canvas which also includes reading lists and lecture recordings (where available).

Please remember that the recording of any class on a personal device requires the permission of the instructor.

Course materials are made available on Canvas where you can also find the Talis reading list.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed against online source material using computerised detection mechanisms.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor.

Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website http://disability.auckland.ac.nz

Special Circumstances

If your ability to complete assessed coursework is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due.

If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page https://www.auckland.ac.nz/en/students/academic-information/exams-and-final-results/during-exams/aegrotat-and-compassionate-consideration.html.

This should be done as soon as possible and no later than seven days after the affected test or exam date.

In the event of unexpected disruption

We undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions, the University has contingency plans to ensure that access to your course continues and your assessment is fair, and not compromised. Some adjustments may need to be made in emergencies. In the event of a disruption, the University and your course coordinators will make every effort to provide you with up to date information via Canvas and the University website.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter https://www.auckland.ac.nz/en/students/forms-policies-and-guidelines/student-policies-and-guidelines/student-charter.html.

Disclaimer

Elements of this outline may be subject to change. The latest information about the course will be available for enrolled students in Canvas.

In this course you may be asked to submit your coursework assessments digitally. The University reserves the right to conduct scheduled tests and examinations for this course online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. The final decision on the completion mode for a test or examination, and remote invigilation arrangements where applicable, will be advised to students at least 10 days prior to the scheduled date of the assessment, or in the case of an examination when the examination timetable is published.

Published on 15/07/2021 04:53 p.m.