CHEMMAT 750A/B : Design Project

Engineering

2022 Semester One (1223) / Semester Two (1225) (30 POINTS)

Course Prescription

Specification, planning and executing a specific process design project. The detailed considerations in the project to include environmental impact, safety and occupational health issues, material selection, process energy demand and efficiency, costing and economics, process start-up and operation.

Course Overview

This course is the continuation of CHEMMAT 306.

In this course, a student will apply the process of design by walking from the intital concept, the fundamental heat and material balances, PFD, P&ID, early feasibiliy based on economics and sustainability. This course will focus on large scale multicomponent systems.  Business cases will be reviewed in more detail.  Modern safety case analysis will be discussed.

Course Requirements

Prerequisite: CHEMMAT 306 or 331 Restriction: CHEMMAT 431, 432 To complete this course students must enrol in CHEMMAT 750 A and B

Capabilities Developed in this Course

Capability 1: Disciplinary Knowledge and Practice
Capability 2: Critical Thinking
Capability 3: Solution Seeking
Capability 4: Communication and Engagement
Capability 5: Independence and Integrity
Capability 6: Social and Environmental Responsibilities

Learning Outcomes

By the end of this course, students will be able to:
  1. Demonstrate an understanding of the technical process of design (Capability 1.1, 2.1, 2.2, 3.1, 3.2, 4.1, 4.2 and 4.3)
  2. Develop maturity and confidence to assess gaps in knowlegde and if outside expertise is required in the design. (Capability 4.3)
  3. Analyse the broader context of design as related to HSE, economics, social, political, and sustainability issues. (Capability 4.3, 5.1, 5.2, 6.1 and 6.2)
  4. Develop the ability to work successfully in a diverse group (Capability 4.1, 4.2 and 4.3)

Assessments

Assessment Type Percentage Classification
Assignments 40% Individual Coursework
Project 50% Group Coursework
Test 10% Individual Test
Assessment Type Learning Outcome Addressed
1 2 3 4
Assignments
Project
Test

Workload Expectations

This course is a standard 15 point course and students are expected to spend 10 hours per week involved in each 15 point course that they are enrolled in.

For this course, you can expect 4 hours of class discussion, 1 hours of reading and thinking about the content and 5 hours of work on assignments and/or test preparation.

Delivery Mode

Campus Experience

Attendance is expected at scheduled activities including including in class tutorials.
Lectures will be available as recordings.
The course will include a plant visit of 1 to 3 days.
The activities for the course are scheduled as a standard weekly timetable.

Learning Resources

Course materials are made available in a learning and collaboration tool called Canvas which also includes reading lists and lecture recordings (where available).

Please remember that the recording of any class on a personal device requires the permission of the instructor.

Health & Safety

No workshops or labs

Course includes significant HSE learnings

Student Feedback

At the end of every semester students will be invited to give feedback on the course and teaching through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions.

Your feedback helps teachers to improve the course and its delivery for future students.

Class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed against online source material using computerised detection mechanisms.

Class Representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor.

Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website http://disability.auckland.ac.nz

Special Circumstances

If your ability to complete assessed coursework is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due.

If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page https://www.auckland.ac.nz/en/students/academic-information/exams-and-final-results/during-exams/aegrotat-and-compassionate-consideration.html.

This should be done as soon as possible and no later than seven days after the affected test or exam date.

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter https://www.auckland.ac.nz/en/students/forms-policies-and-guidelines/student-policies-and-guidelines/student-charter.html.

Disclaimer

Elements of this outline may be subject to change. The latest information about the course will be available for enrolled students in Canvas.

In this course students may be asked to submit coursework assessments digitally. The University reserves the right to conduct scheduled tests and examinations for this course online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.

Published on 05/07/2022 02:18 p.m.