CIVIL 715 : Advanced Structural Concrete

Engineering

2024 Semester Two (1245) (15 POINTS)

Course Prescription

Design and detailing of prestressed and precast concrete components. Advanced mechanics of reinforced concrete members subject to axial, flexure, shear, and torsion actions. Design of state-of-art low-damage concrete structural systems. Includes an independent concrete design project and an independent research project on past failures of concrete structures.

Course Overview

Advanced Structural Concrete combines theoretical aspects of the design of reinforced concrete with more practical aspects. The course aim is to give students an insight into relevant issues affecting the design of reinforced concrete structures today. A strong emphasis is placed on “cutting edge” aspects of concrete construction and the course content is regularly updated to include new developments from both research and practice.

Advanced Structural Concrete builds on knowledge gained from previous courses on the design of reinforced concrete. The focus of the course is on introducing students to “high performance” concrete, including prestressed, precast, concrete materials, and low-damage seismic resisting systems. Methods of analysis and design for these advanced materials are introduced. In addition, methods are taught that allow students to analyse the actual response of concrete members beyond the simplified expressions developed for design practice.

This is a level 9 course and contains a design project and research project that require independent research and analysis to identify solutions to complex structural engineering problems.

Course Requirements

Prerequisite: CIVIL 313 or STRCTENG 303

Capabilities Developed in this Course

Capability 3: Knowledge and Practice
Capability 4: Critical Thinking
Capability 5: Solution Seeking
Capability 6: Communication

Learning Outcomes

By the end of this course, students will be able to:
  1. Demonstrate mastery in the analysis and design of prestressed concrete structures. Evaluate the efficiency of prestressed solutions against a range of design criteria. (Capability 3.1, 3.2 and 5.1)
  2. Demonstrate mastery in the analysis and design of concrete members for axial, moment, and shear actions, including consideration of full loading response and the implications to seismic design provisions and detailing practice. (Capability 3.1 and 3.2)
  3. Understand the application of precast concrete components in reinforcement concrete design and critically assess the implemented solutions when considering factors beyond the design (e.g., constructability, reliability, economics, etc.). (Capability 3.1)
  4. Design state-of-art low-damage seismic resisting systems including post-tensioned walls and slotted beams. Assess the system interactions in concrete buildings and the importance of deformation compatibility in connections. (Capability 3.1, 3.2 and 5.1)
  5. Apply concrete mechanics principles to analyse and interpret previously reported failures in concrete structures. (Capability 4.1, 4.2, 5.1 and 6.1)

Assessments

Assessment Type Percentage Classification
Design project 25% Individual Coursework
Research project 25% Individual Coursework
Test 50% Individual Test
Assessment Type Learning Outcome Addressed
1 2 3 4 5
Design project
Research project
Test

A minimum grade of 40% is required in the final test to pass the course.

Workload Expectations

This course is a standard 15 point course and students are expected to spend 10 hours per week involved in each 15 point course that they are enrolled in.

For this course, you can expect 2 hours completing the weekly module, 1 hour for the tutorial,  2 hours of reading and thinking about the content, and 5 hours of work on assignments and/or text preparation.

Delivery Mode

Online

Attendance is expected at scheduled online activities including tutorials to complete components of the course.
The course will include live online events including group discussions/tutorials and these will be recorded.
Attendance on campus is not required for the exam.
Where possible, study material will be available at course commencement.
This course runs to the University semester timetable and all the associated completion dates and deadlines will apply.

Learning Resources

Course materials are made available in a learning and collaboration tool called Canvas which also includes reading lists and lecture recordings (where available).

Please remember that the recording of any class on a personal device requires the permission of the instructor.

Health & Safety

Students must ensure they are familiar with their Health and Safety responsibilities, as described in the university's Health and Safety policy.

There are no lab or field activities for this course.

Student Feedback

At the end of every semester students will be invited to give feedback on the course and teaching through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions.

Your feedback helps teachers to improve the course and its delivery for future students.

Class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

Tutorials have been added to this course based on feedback received from students.  These tutorials will be run online via Zoom.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed for potential plagiarism or other forms of academic misconduct, using computerised detection mechanisms.

Class Representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor.

Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website http://disability.auckland.ac.nz

Special Circumstances

If your ability to complete assessed coursework is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due.

If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page https://www.auckland.ac.nz/en/students/academic-information/exams-and-final-results/during-exams/aegrotat-and-compassionate-consideration.html.

This should be done as soon as possible and no later than seven days after the affected test or exam date.

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter https://www.auckland.ac.nz/en/students/forms-policies-and-guidelines/student-policies-and-guidelines/student-charter.html.

Disclaimer

Elements of this outline may be subject to change. The latest information about the course will be available for enrolled students in Canvas.

In this course students may be asked to submit coursework assessments digitally. The University reserves the right to conduct scheduled tests and examinations for this course online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.

Published on 01/11/2023 12:37 p.m.