CIVIL 716 : Engineering Risk Management

Engineering

2022 Semester Two (1225) (15 POINTS)

Course Prescription

A broad based understanding of the critical elements of risk and risk management within the construction and engineering industry. Key elements include risk identification with regard to the forms and types of risk inherent in construction. Risk analysis tools and techniques for the construction engineer, and risk response. Risk monitoring techniques, risk control and transference of risk methods. Risk within procurement, insurance issues and risk attenuation.

Course Overview

Risk management is important for all engineering-related projects and systems. This includes knowing the risks associated with all aspects of an engineering project and taking appropriate measures to manage the risks and monitoring these regularly. This course is designed to provide an introduction to the management of risks in a variety of project settings. It aims to oer an overview of risk management process and the methods used to successfully develop and implement a risk management strategy for a project or an organisation. It covers the
framework of risk management, risk identification, risk analysis and risk mitigation measures. Readings will be given via Canvas. Students are expected to read the material and complete assignments.

For all students, there will be 12 contact weeks. There will also be industry guest lectures to provide context and practical introduction to the risk management study. The course is designed to have a practical avour, both in the discussion of risk management approaches as well as in the conduct of assignments designed to develop tools to eectively manage risks.

Course Requirements

Restriction: ENGGEN 722

Capabilities Developed in this Course

Capability 1: Disciplinary Knowledge and Practice
Capability 2: Critical Thinking
Capability 3: Solution Seeking
Capability 4: Communication and Engagement
Capability 5: Independence and Integrity
Capability 6: Social and Environmental Responsibilities

Learning Outcomes

By the end of this course, students will be able to:
  1. Develop an understanding of the critical elements of risk and risk management within the engineering industry settings (Capability 1, 2 and 3)
  2. Identify and address risk management needs at the project or organisational levels (Capability 1, 2, 4 and 6)
  3. Apply sequential steps of Risk Management in business contexts (Capability 1, 2, 3, 4, 5 and 6)
  4. Apply learnt knowledge and techniques into real world projects to effectively manage risks (Capability 1, 2 and 3)
  5. Be able to undertake the role of a Risk Manager in engineering projects (Capability 3, 4 and 5)

Assessments

Assessment Type Percentage Classification
Individual Assignments 50% Individual Coursework
Group Assignments 40% Group Coursework
Quizzes 10% Individual Coursework
Assessment Type Learning Outcome Addressed
1 2 3 4 5
Individual Assignments
Group Assignments
Quizzes

Workload Expectations

This course is a standard 15 point course and students are expected to spend 10 hours per week involved in each 15 point course that they are enrolled in.

For this course, you can expect 12 hours of live tutorials, and 138 hours for reading, assessments, and self-study. 

Delivery Mode

Online

Attendance is expected at scheduled online activities including tutorials to complete components of the course.
The course will include live online events including group discussions/tutorials and these will be recorded.
Attendance on campus is not required for the quizzes.
Where possible, study material will be released progressively throughout the course.
This course runs to the University semester timetable and all the associated completion dates and deadlines will apply.

Learning Resources

Course materials are made available in a learning and collaboration tool called Canvas which also includes reading lists and lecture recordings (where available).

Please remember that the recording of any class on a personal device requires the permission of the instructor.

There are no prescribed texts. Students may find a number of texts that cover the course material well, and should refer to several where possible. The following texts are suggested:
[1] ISO 31000:2018
[2] Guide to Project Management Body of Knowledge, Sixth Edition (2017)
[3] Guide to Project Management Body of Knowledge, Seventh Edition (2021)
[4] The Standard for Risk Management in Portfolios, Programs, and Projects (2019)

Health & Safety

Students are expected to adhere to the guidelines outlined in the Health and Safety section of the Engineering Postgraduate policies and guidelines.


Student Feedback

At the end of every semester students will be invited to give feedback on the course and teaching through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions.

Your feedback helps teachers to improve the course and its delivery for future students.

Class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed against online source material using computerised detection mechanisms.

Class Representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor.

Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website http://disability.auckland.ac.nz

Special Circumstances

If your ability to complete assessed coursework is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due.

If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page https://www.auckland.ac.nz/en/students/academic-information/exams-and-final-results/during-exams/aegrotat-and-compassionate-consideration.html.

This should be done as soon as possible and no later than seven days after the affected test or exam date.

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter https://www.auckland.ac.nz/en/students/forms-policies-and-guidelines/student-policies-and-guidelines/student-charter.html.

Disclaimer

Elements of this outline may be subject to change. The latest information about the course will be available for enrolled students in Canvas.

In this course students may be asked to submit coursework assessments digitally. The University reserves the right to conduct scheduled tests and examinations for this course online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.

Published on 24/12/2021 03:53 p.m.