ELECTENG 310 : Electrical Engineering Design 1

Engineering

2024 Semester One (1243) (15 POINTS)

Course Prescription

An appreciation of the design process as applied to electrical and electronic engineering systems. Design skills are enhanced through engineering projects which typically involve modelling, simulation and analogue/digital electronic hardware design. Professional issues introduced in ENGGEN 204, 303 and 403 (ethics, sustainability, cultural awareness, communication, leadership, teamwork, financial awareness, safety in design) and design for repair are reinforced and developed.

Course Overview

This course is 100% project-based, with students working in teams of four.  The projects will focus on design through simulations and will also offer a hands-on experience. In addition to the design work, students will actively build and test electronic devices. An integral educational objective of the course is to expose students to real-world project(s) proposed by engineering professionals. Typically, these projects will be evaluated by members of the engineering profession, offering students a valuable real-world perspective.

Course Requirements

Prerequisite: COMPSYS 201, and COMPSYS 209 or ELECTENG 209, and ELECTENG 202 or 291, and COMPSYS 202 or SOFTENG 281

Capabilities Developed in this Course

Capability 3: Knowledge and Practice
Capability 4: Critical Thinking
Capability 5: Solution Seeking
Capability 6: Communication
Capability 8: Ethics and Professionalism

Learning Outcomes

By the end of this course, students will be able to:
  1. Understand a complex open-ended problem (Capability 3.1)
  2. Develop a solution to a complex engineering problem (Capability 3.1, 4.1 and 5.1)
  3. Be able to produce a good quality report that is scientifically correct and addresses project requirements. (Capability 6.1)
  4. Be able to give an oral presentation of work done (Capability 6.1)
  5. Be able to keep an accurate record of their work in an engineering log book (Capability 8.1)
  6. Be able to critically assess the work and contributions of their fellow team members (Capability 8.1)
  7. Be able to cooperate with the team members to meet project deadlines. (Capability 8.1)

Assessments

Assessment Type Percentage Classification
Reports 30% Group Coursework
Test 30% Individual Test
Design 25% Group Coursework
Portfolio 5% Individual Coursework
Presentation 10% Group & Individual Coursework
Assessment Type Learning Outcome Addressed
1 2 3 4 5 6 7
Reports
Test
Design
Portfolio
Presentation
To pass, you need to obtain a combined total of 50% from both projects.

Workload Expectations

This course is a standard 15-point course and students are expected to spend 10 hours per week involved in each 15-point course that they are enrolled in.
In this course you can expect 40 hours of lectures, 30 hours of laboratory, and 40 hours of independent and teamwork, 40 hours of work on producing deliverables (report writing, presentation, keeping log-book).

Delivery Mode

Campus Experience

Attendance is required at scheduled activities including labs to complete components of the course.
Lectures will be available as recordings. Other learning activities including labs will not be available as recordings.
The course will not include live online events.
The activities for the course are scheduled as a standard weekly timetable delivery.

Learning Resources

Course materials are made available in a learning and collaboration tool called Canvas which also includes reading lists and lecture recordings (where available).

Please remember that the recording of any class on a personal device requires the permission of the instructor.

Specific learning resources will be provided on Canvas as required.

Health & Safety

As far as possible students will undertake major sections of the projects in the MDLS arena in the Faculty of Engineering. Students will need to have completed the relevant MDLS Health and Safety Induction. Students are expected to adhere to the guidelines outlined in the Health and Safety section of the Engineering Undergraduate Handbook.

Student Feedback

At the end of every semester students will be invited to give feedback on the course and teaching through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions.

Your feedback helps teachers to improve the course and its delivery for future students.

Class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

1. More training will be provided on how to approach open ended projects.
2. More training will be provided to working with industrial clients.
3. All tests will be delivered in person.
4. All lecture recording will be available in Canvas.

Other Information

No additional information.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed for potential plagiarism or other forms of academic misconduct, using computerised detection mechanisms.

Class Representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor.

Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website http://disability.auckland.ac.nz

Special Circumstances

If your ability to complete assessed coursework is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due.

If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page https://www.auckland.ac.nz/en/students/academic-information/exams-and-final-results/during-exams/aegrotat-and-compassionate-consideration.html.

This should be done as soon as possible and no later than seven days after the affected test or exam date.

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter https://www.auckland.ac.nz/en/students/forms-policies-and-guidelines/student-policies-and-guidelines/student-charter.html.

Disclaimer

Elements of this outline may be subject to change. The latest information about the course will be available for enrolled students in Canvas.

In this course students may be asked to submit coursework assessments digitally. The University reserves the right to conduct scheduled tests and examinations for this course online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.

No additional comments.
Published on 21/11/2023 05:19 a.m.