GEOTHERM 602 : Geothermal Energy Technology

Engineering

2021 Semester Two (1215) (15 POINTS)

Course Prescription

Worldwide geothermal development, types of geothermal systems, thermodynamics, properties of water and steam tables, heat transfer, fluid mechanics, steam-field equipment, geothermal power stations, geothermal drilling, wellbore processes, completion tests, downhole measurements, reinjection, corrosion, stored heat, Darcy's law, cold groundwater, geothermal reservoirs, direct use, reservoir modelling, reservoir monitoring and steam-field management.

Course Overview

The course provide an introduction to Geothermal Engineering, it is designed to give an overview of the use of fundamentals (Thermodynamics, Fluid mechanics and Heat transfer) in geothermal engineering. This is to ensure that all students learn a basic level of understanding geothermal and reservoir engineering starting from: geothermal drilling, well testing, steam field equipment, power plants and direct use applications of geothermal energy. This is with focus on hands on field activity to give the students a feel of the different designs of geothermal utilization facility and the ability to compare and contracts different plant components. Also an appreciation of geothermal drilling and well testing equipment.

It also provides non-engineering students with appreciation and understanding of geothermal engineering and develop a multi-disciplinary approach to geothermal energy exploration and development.  
  
GEOTHERM 602 is a block structured course that combines class and field based education. It runs over the first six weeks of Semester two and along with course GEOTHERM 601.  
  
The course is internally assessed with:  
40% of the mark is given to assignments and field trip report   
20% short 90 minute test   
40% final 180 minute test 

Course Requirements

Corequisite: GEOTHERM 601 Restriction: GEOTHERM 785

Capabilities Developed in this Course

Capability 1: Disciplinary Knowledge and Practice
Capability 2: Critical Thinking
Capability 3: Solution Seeking
Capability 4: Communication and Engagement
Capability 5: Independence and Integrity
Capability 6: Social and Environmental Responsibilities

Learning Outcomes

By the end of this course, students will be able to:
  1. Thermodynamics Understand the laws of thermodynamics and their applications in geothermal energy applications (Capability 1, 2 and 3)
  2. Heat Transfer Understand the fundamentals heat transfer: Fourier law of thermal conduction, Newton’s law of cooling, the Stefan Boltzmann law on thermal radiation and their applications in the geothermal applications (Capability 1, 2 and 3)
  3. Fluid Mechanics Understand the fundamentals heat transfer: Fourier law of thermal conduction, Newton’s law of cooling, the Stefan Boltzmann law on thermal radiation and their applications in the geothermal applications Understand the fundamentals laws of fluid mechanics and their applications in the geothermal engineering. (Capability 1, 2 and 3)
  4. Type of geothermal systems Introduction to the engineering classifications of the different types of geothermal systems and the impact of this classification on the geothermal resource development and management (Capability 1, 2 and 3)
  5. Introduction to geothermal drilling Understand the principles of geothermal drilling, coring, site preparations and drilling equipment (Capability 1, 2 and 3)
  6. Down hole measuremen Down-hole measurement methods and the tolls and techniques to assess geothermal well performance (Capability 1, 2 and 3)
  7. Geothermal reinjection The advantages and disadvantages of geothermal fluid reinjection and the environmental impact (Capability 1, 2, 3, 4, 5 and 6)

Assessments

Assessment Type Percentage Classification
Assignments 40% Individual Coursework
Tests 60% Individual Coursework
Assessment Type Learning Outcome Addressed
1 2 3 4 5 6 7
Assignments
Tests

Workload Expectations

This course is a block-structured 15 point course and students are expected to spend on average 16 hours per week involved in each 15 point course that they are enrolled in.  

For this course, you can expect 40 hours of lectures, a 30-hour tutorial, 40 hours of reading and thinking about the content and 50 hours of work on assignments and/or test preparation.

Delivery Mode

Campus Experience

For those attending on campus:  

Attendance is required at scheduled activities including tutorials and field trips to complete components of the course, but field activities will not be available as recordings.  

Lectures will be available as recordings. Other learning activities including tutorials will be available as recordings.   

The course will not include live online events.   

Attendance on campus is required for the tests.   

The activities for the course are scheduled as a block delivery.   

For those approved to study remotely due to the impact of COVID 19:  

Attendance is expected at scheduled online activities including tutorials to complete components of the course, provisions will be made to record key parts of the field trips. 

The course will not include live online events.   

Attendance on campus is not required for the tests.   

Where possible, study material will be available at course commencement or be released progressively throughout the course.   

This course runs over the first six weeks of semester 2.

Learning Resources

All learning resources (lecture material) are provided to the students with additional reading material and data given on Canvas. 

Health & Safety

There are three days of field activity, which requires extensive preparations and the development of a detailed Health and Safety management plant. PPE gear will be provided to the students. The students are also advised (before starting the course) to bring personal safety boots, warm and wet weather gear.

Student Feedback

At the end of every semester students will be invited to give feedback on the course and teaching through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions.

Your feedback helps teachers to improve the course and its delivery for future students.

Class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

The course is very well received by our students 

Other Information

Given the block structured nature of the course (6 weeks) it may not be possible to do the course along with other standard courses that run over the full semester.    
This course has to be taken along with GEOTHERM 601.  

Digital Resources

Course materials are made available in a learning and collaboration tool called Canvas which also includes reading lists and lecture recordings (where available).

Please remember that the recording of any class on a personal device requires the permission of the instructor.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed against online source material using computerised detection mechanisms.

Class Representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor.

Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website http://disability.auckland.ac.nz

Special Circumstances

If your ability to complete assessed coursework is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due.

If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page https://www.auckland.ac.nz/en/students/academic-information/exams-and-final-results/during-exams/aegrotat-and-compassionate-consideration.html.

This should be done as soon as possible and no later than seven days after the affected test or exam date.

Learning Continuity

In the event of an unexpected disruption we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and your assessment is fair, and not compromised. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator, and if disruption occurs you should refer to the University Website for information about how to proceed.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter https://www.auckland.ac.nz/en/students/forms-policies-and-guidelines/student-policies-and-guidelines/student-charter.html.

Disclaimer

Elements of this outline may be subject to change. The latest information about the course will be available for enrolled students in Canvas.

In this course you may be asked to submit your coursework assessments digitally. The University reserves the right to conduct scheduled tests and examinations for this course online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. The final decision on the completion mode for a test or examination, and remote invigilation arrangements where applicable, will be advised to students at least 10 days prior to the scheduled date of the assessment, or in the case of an examination when the examination timetable is published.

Published on 22/02/2021 10:53 p.m.