MECHENG 736 : Biomechatronic Systems

Engineering

2024 Semester Two (1245) (15 POINTS)

Course Prescription

Mechatronic principles and techniques for measuring, assisting, augmenting and mimicking biological systems. Topics include: brain machine interfaces, sensors and actuators, biomechanics and motion control, wearable and assistive devices, bioinstrumentation, soft robotic technologies, human factors, safety/ethical aspects, and biomechatronic design principles. Significant hands-on experience through the design, modelling and development of paradigmatic biomechatronic systems.

Course Overview

Explores principles, methods, and techniques of Mechatronics for analyzing, modelling, designing, and controlling bioinspired robotic systems and biomechatronic systems. 
Topics include: 
  1. Introduction to Biomechatronics
  2. Biological Signals & Biosensors (e.g., EEG, EMG, ECG, Vision, Sound and haptic sensors etc.)
  3. Human Motion Analysis (e.g., gait kinematics and kinetics analysis)
  4. Bioinstrumentation (e.g., pneumatic muscles, IPMC, DEA, Hybrid actuators etc.)
  5. Human Robot Interaction (e.g., human-robot interaction modelling, antagonistic configurations, direct force control, impedance and assist-as-needed control etc.)
  6. Biomechatronic Example #1 (e.g., rehabilitation robots and assistive devices, design optimization, Integration of biosensors and actuators, interfacing issues etc.)
  7. Biomechatronic Example #2 (e.g., biorobotic instrumentation, design and analysis of soft-bodied robotics).
This course shares lectures and other content with MECHENG 730; completing this course will prevent future enrolments in MECHENG 730.

Course Requirements

Restriction: MECHENG 730

Capabilities Developed in this Course

Capability 3: Knowledge and Practice
Capability 4: Critical Thinking
Capability 5: Solution Seeking
Capability 6: Communication
Capability 7: Collaboration

Learning Outcomes

By the end of this course, students will be able to:
  1. Acquire and apply knowledge of the key modules required for the analysis, modelling, design and control of a biomechatronic system. (Capability 3.1)
  2. Derive specifications for the development of biomedical devices that interact with humans (e.g., actuator and sensor selection, ergonomics etc.). (Capability 4.1, 4.2 and 5.1)
  3. Identify critical issues involved in the design of biomechatronic devices, such as safety and compliance. (Capability 4.1 and 5.1)
  4. Design experiments that focus on capturing, analyzing and assessing human motion, biological signals and forces exerted as well as human behaviors. (Capability 5.1)
  5. Design and implement robotic and biomechatronic devices and test their performance. (Capability 3.1, 4.1, 4.2 and 5.1)
  6. Develop and implement appropriate control algorithms for robotic and biomechatronic devices. (Capability 3.1, 4.1, 4.2 and 5.1)
  7. Participate in a robotic grasping and manipulation challenge that will evaluate the capabilities of the developed biomechatronic devices. (Capability 4.1, 4.2, 6.1 and 7.1)
  8. Research, analyse and communicate the design decisions behind the development of the biomechatronic devices focusing on ease of use and maintenance by amputees and sustainability. (Capability 6.1)

Assessments

Assessment Type Percentage Classification
Laboratories 20% Individual Coursework
Project 30% Group & Individual Coursework
Final Exam 50% Individual Examination
Assessment Type Learning Outcome Addressed
1 2 3 4 5 6 7 8
Laboratories
Project
Final Exam

Students must sit the exam to pass the course. Otherwise, a DNS (fail) result will be returned.

Workload Expectations

This course is a standard 15 point course and students are expected to spend 10 hours per week involved in each 15 point course that they are enrolled in (15 weeks including the exams period).

For this course, you can expect 36 hours of lectures, 2 laboratory sessions of 3 hours each, 38 hours of reading and thinking about the content and 70 hours of work on assignments. 

Delivery Mode

Campus Experience

Attendance is expected at scheduled activities (including labs) to complete components of the course.

Lectures will also be available as recordings. 

The activities for the course are scheduled using a standard weekly timetable.

Learning Resources

Course materials are made available in a learning and collaboration tool called Canvas which also includes reading lists and lecture recordings (where available).

Please remember that the recording of any class on a personal device requires the permission of the instructor.

Health & Safety

Appropriate lab induction sessions will be scheduled for Health & Safety purposes. 

Students must ensure they are familiar with their Health and Safety responsibilities, as described in the university's Health and Safety policy

Student Feedback

At the end of every semester students will be invited to give feedback on the course and teaching through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions.

Your feedback helps teachers to improve the course and its delivery for future students.

Class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

In 2023, 47% of students completed the survey. Overall, 97.4% of the responses indicated that they were very satisfied or satisfied with the quality of this course.
The following actions were taken in response to the student feedback:
- We have allocated more time and resources for the biomechatronics project.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed for potential plagiarism or other forms of academic misconduct, using computerised detection mechanisms.

Class Representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor.

Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website http://disability.auckland.ac.nz

Special Circumstances

If your ability to complete assessed coursework is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due.

If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page https://www.auckland.ac.nz/en/students/academic-information/exams-and-final-results/during-exams/aegrotat-and-compassionate-consideration.html.

This should be done as soon as possible and no later than seven days after the affected test or exam date.

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter https://www.auckland.ac.nz/en/students/forms-policies-and-guidelines/student-policies-and-guidelines/student-charter.html.

Disclaimer

Elements of this outline may be subject to change. The latest information about the course will be available for enrolled students in Canvas.

In this course students may be asked to submit coursework assessments digitally. The University reserves the right to conduct scheduled tests and examinations for this course online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.

Published on 15/12/2023 08:38 a.m.